Jessica Tyson
16/12/2024 • 5 min read
If you’ve ever heard your vape bubbling or gurgling, you know it’s a sound that can raise a few eyebrows. Is something wrong? Could it be dangerous? The good news is that this is a common issue with straightforward fixes. Let’s get into the bubbling mystery, explore its causes, and learn how to stop it from happening.
A bubbling or gurgling vape is usually a sign that e-liquid is somewhere it shouldn’t be. One of the most common reasons is a flooded coil, where too much e-liquid saturates the coil, leading to bubbling as the device struggles to vaporise the liquid effectively. Excess e-liquid can also pool around the atomiser coil, leading to inadequate airflow and gurgling noises.
Over-priming, which happens when you apply too much e-liquid during preparation, can also result in excess liquid pooling around the coil and causing gurgling sounds. Managing air pressure by taking long, slow puffs can prevent gurgling noises. Similarly, using a wattage setting that’s too low for your coil can prevent the liquid from vaporising properly, leaving it to accumulate and make that characteristic bubbling noise.
Finally, high levels of vacuum pressure, caused by too much vape juice in the tank, can also contribute to gurgling.
Vape spitback is a common issue, and it’s as unpleasant as it sounds. Essentially, spitback happens when excess e-liquid in the coil bubbles and pops, sending tiny droplets up the centre post and into the mouthpiece. Fortunately, it’s not harmful.
So, what causes this annoying phenomenon? One primary culprit is heating the e-liquid incorrectly, which can create a shock effect and cause the liquid to collect on the coil. Using vape juice that’s too thin for your device can also lead to spitback, as it doesn’t vaporise as efficiently. Over-priming your coil—applying too much e-liquid during preparation—can result in excess liquid pooling in the chamber, ready to pop at the slightest provocation.
To avoid spitback, make sure you’re using the right type of e-liquid for your device and priming your coil just enough to get it ready without overdoing it. Regularly cleaning your device and ensuring it’s properly maintained can also help keep spitback at bay.
Disposable vapes like Elf Bars may bubble for reasons unique to their design. During the manufacturing process, some residual e-liquid can remain in the device, leading to bubbling sounds during the first few uses.
Additionally, improper storage conditions — such as leaving the vape in direct sunlight or in an overly warm or cold environment — can alter the viscosity of the e-liquid, making it harder for the device to handle and resulting in gurgling when you inhale.
See all disposable vapesSingle-use disposable vapes should be properly disposed of when they show signs of wear and tear or malfunction, but you can also look for refillable pod systems that allow you to clean the device should any bubbling start to occur.
Fixing a gurgling vape is simpler than you might think. If the coil is old or damaged, replacing it with a fresh one can eliminate bubbling caused by flooding. Adjusting the wattage setting to the recommended range for your coil can also promote proper vaporisation and prevent liquid build-up.
Another effective solution is clearing out excess e-liquid. You can remove the drip tip and blow gently to expel any trapped liquid, flick the tank to remove excess e-liquid, or use a paper towel to soak up pooled liquid in the chimney, followed by cleaning the tank and coil.
It's also important to clean the air vents to prevent gurgling and ensure optimal performance. Lastly, keeping an eye on how much e-liquid you’re adding to the tank is crucial. Avoid overfilling the tank, as this can lead to flooding and disrupt the airflow, making bubbling much more likely.
Regular maintenance not only prevents issues like gurgling and spitback but also ensures your device performs at its best. Here are some tips for maintaining your vape tank:
By following these maintenance tips, you can ensure a satisfying and trouble-free vaping experience.
If you’re frequently dealing with issues like gurgling or spitback, it might be time to consider upgrading to a modern vape tank. Here are some compelling reasons to make the switch:
Upgrading your vape tank can significantly enhance your vaping experience, providing better performance, reduced issues, and more customisation options.
Elf Bars and other disposable vapes can occasionally bubble, but this issue is usually short-lived. A gurgling vape tank can be a common issue with disposable vapes, often caused by excess e-liquid, faulty coils, or blocked airflow. Often, it’s due to residual e-liquid left over from the production process, which causes gurgling noises during the first few puffs.
Storage plays an equally important role in preventing bubbling; keeping your Elf Bar away from direct sunlight and extreme temperatures will help maintain the e-liquid’s proper consistency, ensuring a smoother vaping experience. By following these simple guidelines, you can avoid the bubbling problem and enjoy your disposable vape to its fullest.
Bubbling in your vape can be annoying, but it’s rarely a serious problem. Whether it’s due to a flooded coil, improper wattage settings, or a disposable vape issue, the solutions are simple and effective. Understanding the causes and adopting preventative measures will help ensure a smooth and satisfying vaping experience every time.
Still have questions?
Visit FREESMO.co.uk for more vaping tips
